Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
A
TM-U220A
Specification
(For Argentina Fiscal)
App.3 App.2
Under [Condition 3], the characters per line is more than that with [Condition 2]. However, the
average characters per line in a unit time under [Condition 3] is almost the same as that under
[Condition 2] because time for paper feeding and autocutting are required in [Condition 3].
•
Under the conditions listed below, the printer changes the print mode to 3.5 lps (40 columns per
line with 16 cpi, at 1/6" line spacing) and runs the print duty control by detecting the print head
temperature automatically to avoid trouble caused by rapid power voltage drop.
• Various bit-image printing
• Various character style printing (only in ANK model)
• User defined character printing
• When selecting a character consisting of 25 dots or more defined in the character code
page
[lps: lines per second]
[cpi: characters per 25.4 mm {1"}]
3) Data transmission
Transmit data after the printer power is turned on and the initialization has been completed.
4) Manual cutter
Manual cutting must be done after finishing paper feed. After cutting the roll paper, the paper must be
fed 1.235 mm {7/144"} or longer before any subsequent print (to cancel the gear backlash).
