Epson TM-T85, Руководство оператора

Страница: 98 / 115

5-40 Commands
• When the LSB of n is 1, white/black reverse mode is turned on.
[Notes] • In white/black reverse printing mode, print dots and non-print
dots are reversed. (Characters are printed in white on a black
background.)
• This command is available for built-in characters and user-defined
characters.
• When white/black reverse printing mode is on, it also applied to
character spacing set by ESC SP.
• This command does not affect bit image, downloaded bit image,
bar code, HRI characters, and spacing skipped by HT, ESC $, and
ESC \
.
• This command does not affect the space between lines.
• White/black reverse mode has a higher priority than underline
mode. Even if underline mode is on, it is disabled (but not
canceled) when white/black reverse mode is selected.
[Default] n = 0
GS H n
[Name] Select printing position for HRI characters
[Format] ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
[Range] 0
≤
n
≤
3, 48
≤
n
≤
51
[Description] Selects the printing position of HRI characters when printing a bar
code.
n selects the printing position as follows:
• HRI indicates Human Readable Interpretation.
[Note] HRI characters are printed using the font specified by GS f.
[Default] n = 0
[Reference] GS f, GS K
GS I n
[Name] Transmit printer ID
[Format] ASCII GS I n
Hex 1D 49 n
n Printing position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code