Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T100M)
2
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-T100M Series printer.
2.1 References of Firmware Versions
Refer to the release notes (Relnote.txt/SupportedDevicesList.txt).
2.2 Settings of Memory Switches
Please check device specification sheet.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting
range
Baud rate [bps]
2400, 4800, 9600, 19200, 38400,
57600,
115200
Bit length [bit]
8
Parity
NONE, ODD, EVEN
Stop bit [bit]
1
Handshake DTR/DSR
The default settings are as shown in the following table.
Item Setting
range
Baud rate [bps]
38400
Bit length [bit]
8
Parity NONE
Stop bit [bit]
1
Handshake DTR/DSR
The baud rate setting of device is set using the Utility.
For details, please refer to the “Utility User's Manual”.
