Epson tm-m30, Техническое справочное руководство

Страница: 111 / 120

111
Appendix
Socket communication
For Ethernet interface
Communication specifications
10BASE-T/100BASE-TX
For Wi-Fi interface
Specification
•
IEEE802.11b/g/n (2.4 GHz band) or IEEE802.11a/b/g/n (2.4 GHz or 5 GHz band) compliant
Wi-Fi communication compatible.
•
Infrastructure mode and 802.11 Ad-hoc mode* are supported.
•
Support the IP address automatic acquisition function (DHCP, APIPA).
*: OT-WL06 does not support Ad-hoc mode.
Communication Standard
When using OT-WL02:
•
IEEE802.11b (2.4 GHz)
•
IEEE802.11g (2.4 GHz)
•
IEEE802.11n (2.4 GHz)
•
Time out: 90 sec. (changeable)
•
Job cancel: Not available
•
Banner printing: Not available
•
Port type TCP communication port for direct printing
•
Port number 9100
•
Port communication direction bidirectional
•
Max. simultaneous connections 6
•
Number of connections for which printing is
available 1 (Other users need to wait until the
connection is released.)
•
Time out: 90 sec. (changeable)
•
Countries and regions where Wi-Fi can be used are limited. Since notes are provided for each
country, check the sheet supplied with the product.
•
When using wireless LAN, make sure you disconnect the LAN cable. If a LAN cable is connected,
wireless LAN is disabled.
•
The combinations of wireless LAN cable set and firmware version you can use with this product are
as follows.
You can perform a firmware update by using the TM-m30 Firmware Updater if using a Windows
computer, or by using the Epson TM Utility if using a smart device. For details, see
"Utilities" on page
83 .
Wireless LAN Cable Set Firmware Version
OT-WL02
Until 1.44 ESC/POS, or 1.45A ESC/POS or later
OT-WL05 Until 1.44 ESC/POS, or 1.45B ESC/POS or later
OT-WL06 1.45A ESC/POS or later, or 1.45B ESC/POS or later