Epson TM-H6000IV-DT, Техническое справочное руководство

Страница: 87 / 220

Chapter 2 Setup
87
2
Network settings
Perform n e t work se tting s, s u ch as t he IP address.
Yo u ca n perform se tting s in t he follow ing ways.
• Se tting in a local e n v i ro n me nt : Se tting w it h W in dows

Se tting w it h EPSON TMNe t WebCo n f ig
• Se tting o n a comp ut er for se tting : Se tting w it h EPSON TMNe t WebCo n f ig
Infrastructure settings (Windows Embedded POSReady 7)
1
Click [Start], then [Control Panel]. Run "Network and Sharing Center".
2
The "Network and Sharing Center" window is displayed. Click [Set up a
new connection or network].
3
The "Set up a Connection or Network" window is displayed. Select
[Connect to the Internet] and click [Next].
4
Click [Wireless]. The usable wireless networks are displayed on the
bottom right of the window. Select the network you will use.
5
The "Connect to a Network" window is displayed. Input the network
settings and click [OK].
Yo u are co nn ec t ed t o a n e t work.

This product cannot use ad hoc mode and infrastructure mode at the same time.

Perform network settings the devices you will connect to this product via ad hoc.

If ePOS-Device is disabled, EPSON TMNet WebConfig will not start.

For detail. refer to "Enabling or Disabling ePOS-Device" on page 81 .

If you perform settings in a local environment, connect a display, a keyboard, and a
mouse with this product. If you use a PC for setting, you do not have to connect a
display, a keyboard, and a mouse with this product. Instead, set up a direct network
connection with this product.