Epson TM-290-II, Руководство оператора

Страница: 31 / 62

• Divide the number of dots to be printed by 256. The integer
answer is
n2
and
the remainder is
n1.
Therefore, the
number of dots in the horizontal direction is calculated as:
n1+256Xn2.
• If the. bit image data input exceeds the number of dots to
be printed on a line, the excess data is ignored.
• “d’ indicates the bit image data- Set a corresponding
bit
to 1 to print a dot, otherwise set it to 0.
• The bit image modes selectable by
m
are as follows:
Horizontal Direction
m
Number of Dots Dot Density
Horizontally
Maximum Number
in
Vertical
Adjacent Dots of Horizontal Dot
Direction
Positions
0 8 Single-density Permitted 210
N o t e s
Double-density Prohibited 420
• If
m
is out of range, the data following
n1 (n1
is included)
is processed as normal data.
• After printing a bit image, the printer returns to normal data
processing mode.
• The relationship between the image data and dots to be
printed is as follows.
• Double-density bit image is disabled in Page Mode.
I
Bit image data
T o p d o t
B o t t o m d o t
Print data
- 2 6 -