6
TM-T88III User’s Manual
English
Troubleshooting
No LEDs on the control panel
Check the power supply cable connections and the power outlet.
ERROR
LED on (not flashing) with no printing
If
PAPER OUT
is
on
, the paper roll is not installed or is near the end.
If
PAPER OUT
is
off
, the printer cover is not closed properly.
ERROR
LED flashing with no printing (and no paper jam)
Printing stops if the head overheats and resumes when it cools.
Turn the printer off, and after 10 seconds, back on.
Removing Jammed Paper
CAUTION:
Do not touch the print head because it can be very hot after printing.
1. Turn the printer off and press the cover open button.
2. Remove jammed paper, reinstall the roll, and close the cover.
3. If paper is caught in the cutter and you cannot open the printer
cover, open the cutter cover as shown on the left below.
4. Turn the knob until you see a triangle in the opening, as shown
on the right below. This returns the cutter blade to the normal
position. There is a label near the cutter to assist you.
5. Close the cutter cover.
6. Open the printer cover and remove the jammed paper.
