1.
Access Web Config and select the
Network
tab >
Wi-Fi
, and then select
Disable Wi-Fi
.
2.
Check the message, and then select
OK
.
Disconnecting Wi-Fi Direct (Simple AP) from Web Config
Disconnect Wi-Fi Direct (simple AP) from Web Config.
1.
Access Web Config and select the
Network
tab >
Wi-Fi Direct
.
2.
Select
Disable
for
Wi-Fi Direct
.
3.
Click
Next
4.
Check the message, and then select
OK
.
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1.
Tap
on the home screen.
2.
Select
Router
.
The network status is displayed.
3.
Tap
Change Settings
.
4.
Select
Others
>
Disable Wi-Fi
.
5.
Check the message, and then start setup.
6.
When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7.
Close the Network Connection Settings screen.
8.
Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1.
Tap
on the home screen.
Administrator's Guide
Solving Problems
64
