Epson SureColor SC-F7000, Руководство пользователя

Страница: 28 / 101

c
Important:
❏
Do not use the media holding plates with
media that is more than 0.4 mm thick.
The media holding plates could touch
and damage the print head.
❏
Move the media holding plates to the left
and right edges of the platen when they
are not in use.
❏
Do not use the media holding plates if the
sides of the printed media are smudged or
torn.
❏
Leave left and right margins of over 10
mm when using the media holding
plates. Narrower margins could result in
printer printing over the plates.
Q
Close the front cover.
Using the Optional Heavy Roll Media
Feeding Unit
This section describes how to load media when the
optional heavy roll media feeding unit is installed.
Using a lifter is recommended when handling a media
that is 40 kg or heavier.
The explanation that follows assumes that a lifter is
used.
The following types of lifter can be used.
❏
Fork or platform thickness: 28 mm or less
❏
Fork or platform can be lowered to approx. 190 mm
from the floor.
!
Caution:
Because the media is heavy, it should not be carried
by one person. When loading or removing the
media, use at least two persons. Using a lifter is
recommended when handling a media that is 40 kg
or heavier.
A
Turn on the printer by pressing the
P
button.
B
Loosen the roll holder fixing screws and adjust
the roll holders so that the gap between the two is
wider than the media.
c
Important:
If the right holder handle shaft is not visible,
rotate the handle forward until it stops. The
media can not be properly loaded if the handle
shaft is not visible.
C
Place the media on a lifter oriented according to
how it is rolled (see below) and move the lift to
position the media as indicated by the mark on
the label.
Printable Side Out
SC-F7000 Series User’s Guide
Basic Operations
28