49
Sawgrass Technologies, Inc.
~Epson
®
WorkForce 30/T30/B40W~ChromaBlast™
• Next, determine what
Step Size
you want to apply to the
Color Finder Palette
.
This is simply a question of how much you want your
Start Color
to fluctuate.
• If your
Start Color
is close the color you are looking for, use a low
Step Size
(i.e. 5-10). However, if your start color is not close to what you are looking
for, use a higher
Step Size
.
• You can enter any
Step Size
value between
1
and
40
.
• As an example, let’s say your
Start Color
is
C:20, M:100, Y:150, K:0
and you
select
Cyan
and
Magenta
to be your
Step Colors
. You also enter a
Step Size
of
10
. When the
‘Print Colors’ Button
is clicked, your
Start Color
will be in
the middle of the
Color Finder Palette
and from there each color will vary the
Cyan
and
Magenta
values by
10
.
• When you are finished selecting the
Start Color
,
Step Colors
, and the
Step
Size
, click on the
Print Colors Button
. This will print your custom
Color
Finder
Palette
directly to your printer.
• After printing the
Color Finder Palette
, transfer it to your selected substrate
and then try to match your desired color to one that is on the palette. If you
find a suitable match, you are finished using the
Color Finder Tool
. Move on
to
Section V. “The Custom Palette”
.
• If you couldn’t find an accurate match on the first printed
Color Finder
Palette
, don’t worry. Follow the easy steps below, and you can find a more
suitable custom color.
To Find More Custom Colors
1.
First, try to locate a new
Start Color
from the palette that is closer than the
original color.
2.
Next, after finding a more suitable
Start Color
, write down that color’s
CMYK
value. Here is how to obtain this value. There are numbers under each color
that are dependant upon which
Step Colors
you chose. For example, it might
say
C:70 M:120
. Take note of these values. Then, at the bottom left of the
Color Finder Palette
you will see a full set of
CMYK
values. The new
Start
Color’s CMYK
value would be
C:70, M:120
and whatever the
Y&K
values are
from the full set.
3.
Lastly, plug the
CMYK
values for the new
Start Color
into the boxes in
Color
Finder
, choose your
Step Size
, and click on
Print Colors
once again.
Continue with steps
1-3
until you find your desired color.
Содержание Stylus WorkForce 30
Страница 2: ......
Страница 63: ...55 Sawgrass Technologies Inc Epson WorkForce 30 T30 B40W ChromaBlast Notes ...
Страница 64: ......
