manualshive.com logo in svg

Epson Stylus Scan 2000, Руководство по обслуживанию

Поделиться
Скачать
Epson Stylus Scan 2000 Скачать руководство пользователя страница 136

EPSON Stylus Scan 2000

Revision A

Maintenance

Lubrication

135

6.3  Lubrication

6.3.1  Printer Mechanism

The type and amount of oil and grease used to lubricated the printer parts are determined 
based on the results of internal evaluations. Therefore, be sure to apply the specified type 
and amount of oil and grease to the specified part of the printer mechanism during 
servicing.

n

Never use oil or grease other than those specified in this manual. 
Use of different types of lubricant can damage the printer and the 
components.

n

Never apply a larger amount of lubricant than specified in this 
manual.

Table 6-1.  Specified Lubricants

Type

Name

EPSON Code

Supplier

Grease

G-26

B702600001

EPSON

Oil

O-12

1038991

EPSON

Table 6-2.  Lubrication Points

No.

Standard

Remarks

See

page

1

<Lubrication Point>

Contact between “ROLLER, PF” and 
“PAPER GUIDE, REAR”

Do not put grease around the paper path.

Use a syringe to apply it.

Apply grease while rotating “GEAR, 
73.6”.

137

<Lubricant Type> G-26

<Lubrication Amount>

A half turn of “ROLLER, PF”

2

<Lubrication Point>

Contact points between “PAPER 
GUIDE, FRONT” and each roller:

“ROLLER, PF” (1 point)

“ROLLER, EXIT” (2 points)

Lubricate the contact points between the 
hooks on “PAPER GUIDE, FRONT” 
and each roller.

Avoid applying grease around the paper 
path.

Use a syringe to apply it.

137

<Lubricant Type> G-26

<Lubrication Amount>

10-mm long

2-mm long

3

<Lubrication Point>

Contact points between the carriage 
assembly and “FRAME, UPPER”

Verify that the carriage moves smoothly 
after lubricating it.

Use a syringe to apply it.

138

<Lubricant Type> G-26

<Lubrication Amount>

Range from the HP sensor installation 
point to the point where “GUIDE 
PLATE, CABLE” is attached.

4

<Lubrication Point>

Gears:

“GEAR, 73.6”

“COMBINATION GEAR, 8, 14.4” 

“GEAR, 23.2”

Rotate the gears after applying grease to 
evenly distribute it.

Use a syringe to apply it.

138

<Lubricant Type> G-26

<Lubrication Amount>

1/4 of gear tooth

1/3 of gear tooth

1/3 of gear tooth

1/3 of gear tooth

Table 6-2.  Lubrication Points (continued)

No.

Standard

Remarks

See

page

Содержание Stylus Scan 2000









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды