background image

EPSON

®

STYLUS Pro and Pro XL

COLOR INK JET PRINTER

Setup and Software Guide for Macintosh

®

All rights reserved. No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Seiko Epson 

Corporation.

No patent liability is assumed with respect to the use of the information contained herein.

Neither is any liability assumed for damages resulting from the use of the information

contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, 

costs, 

or expenses incurred by purchaser or

third parties as a result of: accident, misuse, or abuse of this product or unauthorized

modifications, repairs, or 

alterations 

to this product, or (excluding the U.S.) fail me to

strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from

the use of any options or any consumable products other than those designated as

original EPSON 

Products 

or EPSON Approved products by Seiko Epson 

Corporation.

EPSON and EPSON Stylus are registered trademarks of Seiko Epson Corporation.
EPSON Connection is 

service mark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. EPSON disclaims any and all 

rights in

those marks.

The 

Energy Star emblem 

does 

not represent 

EPA 

 of any product or service.

Copyright © 1995 by Epson America, Inc.

10/95

Printed on recycled paper with at least 10% post-consumer content

Содержание Stylus Pro XL





















































Отзывы: