10. If the installation software stops responding, follow
the steps in “Completing Printer Software
Installation” below to continue.
11.
When you see this screen, turn ON your printer
.
The screen disappears and installation continues.
12. When installation is finished, click
OK
.
13. You see the EPSON Product Registration screen:
Follow the on-screen instructions to register your
printer with EPSON. At the last screen, click
Done
.
14. Return to the back of the
Start Here
sheet to install
your creative software and EPSON documentation.
Completing Printer Software Installation
While you’re installing your printer software,
you’ll see this window:
If this window remains on your screen for a few
minutes, your installation program may have
stopped responding.
To resume software installation, follow these steps:
1. On your keyboard, hold down the
Ctrl
and
Alt
keys, then press the
Delete
key. You see a
window like this:
2. Click the
E_srcv03
or
E_srcv02
program to
highlight it (you may need to scroll down).
3. Click the
End Task
button to close the
program.
4. If you see a screen confirming the end of the
task, click
End Task
again.
5. Your software will finish installing now.
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION.
General Notice: Other product names are for identification purposes only and may be trademarks of their respective
owners. EPSON disclaims any and all rights in those marks. Copyright © 2000 by Epson America, Inc. 10/00
CPD-11390
If you connected your printer with a
parallel interface cable, you may want to
restart your computer now.
Click
here
Then
click
here
