Epson Stylus color 600, Руководство по обслуживанию, Страница: 132 / 154

Chapter 6 Maintenance
Rev. A
6-3
No. Standard Remarks
5 <Lubrication Point>
The shaft for “GEAR, 16, 40.8” at
“FRAME, LEFT” Use a syringe to apply it.
<Lubricant Type> G-26
<Lubrication Amount>
Approx. 5mm long
6 <Lubrication Point>
Bush for “ROLER, PF”
1) Left:
Inside the bush
2) Right: Inside the bush (near the
pump assembly)
When applying to the right bush, apply it
from the side of the paper path and wipe
off any grease stick out to the cap
assembly side.
Rotate “ROLLER, PF” after applying the
grease to evenly distribute it in the bush.
Use a syringe to apply it.
<Lubricant Type> G-26
<Lubrication Amount>
Approx. 3mm diametrically
7 <Lubrication Point>
Both Left/Right Bush for “ROLLER, EXIT” Do not put grease around the paper path.
Use a syringe to apply it.
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply inside the bush
8 <Lubrication Point>
Contact between “HOLDER, PULLEY,
DRIVEN” and “FRAME, UPPER” Verify that the holder slides only with a
spring force after applying the grease.
Use a syringe to apply it.
<Lubricant Type> G-26
<Lubrication Amount>
2mm long at each specified point
9 <Lubrication Point>
ASF;
A round hole of the right frame of ASF (to
hold the roller shaft) Do not put grease to “ROLLER,
ASSEMBLY, LD”.
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply inside the hole
10 <Lubrication Point>
ASF;
Contact between “HOPPER” and “LEVER,
HOPPER, RELEASE” Completely wipe off any grease stack out
to inner side of ASF.
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply to the contact
Table 6-3. Lubrication Points (Continued)