Epson STYLUS COLOR 480, Руководство по установке

Страница: 4 / 8

Installing the Printer Software
After connecting the printer to your computer, you need to install the
software included on the “Printer Software for EPSON Stylus COLOR 480”
CD-ROM shipped with your printer.
If you wish to make a floppy disk version of the printer software on your
CD-ROM, you can use the driver disk creation utility included on the CD.
Note:
❏
When using Windows 2000, if you do not follow the steps below to install the
printer software, Microsoft’s Universal driver may be installed instead. To see
if the Universal driver has been installed, right click anywhere in the printer
driver window and then click
About
in the list that appears. If a screen
containing the words
Unidrv Printer Driver
is displayed, follow the steps
below to reinstall the printer driver.
❏
If the Digital Signature Not Found dialog box appears during the installation
process, click
Yes . If you click No , you must reinstall the printer software as
described below.
Follow these steps to install your printer software.
1.
Make sure that your printer is unplugged.
2. Turn on your computer and start Windows. If the New Hardware
Found dialog box or any other Wizard appears, click
Cancel .
3. Insert the printer software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears. If it does not, double-click
the
My Computer icon. Click the CD-ROM icon, then select open from
the File menu. Then double-click Epsetup.exe . (For floppy disk users,
insert the disk in a disk drive and double-click the My Computer icon,
then the floppy disk drive icon, and then Setup.exe .)
4. Select Install Printer Driver/Utility , and click .
Then click OK in the dialog box that appears to
start the printer software installation.
5. Follow the on-screen instructions to plug the
power cord into a properly grounded electrical
outlet. Before plugging in the cord, check the
label on the back of the printer to make sure the
voltage required by the printer matches that of
the electrical outlet you will plugging it into.
Also, make sure that you have the correct power cable for your power
source.