ADDENDUM
General Description
SERVICE MANUAL
1.1.3
Printer Operations
This section describes the basic operation of the printer.
1.1.3.1 Control
Panel
The control panel of the Stylus-1000 contains six non-lock
type push
buttons and nine LED indicators for easy
controls over the various printer’s functions.
DATA
INK OUT
I
ECONOMY
CONDENSED
1
Figure
1-1 Control
Panel -
Stylus-1000
■
PAUSE
■
ECONOMY/CONDENSED
■
FONT
LOAD/EJECT
■
■
RESET
[Indicators]
■
PAUSE
■
DATA
■
PAPER OUT
OUT
■
ECONOMY/CONDENSED
■
FONT
Switch the printer status between the printing and the no-printing in case if
any print data is exist in the input buffer.
Selects the ECONOMY printing mode or the CONDENSED printing mode
alternately. It also works as a reverse micro feed button if the
button has
been pressed.
Select the one of the available fonts. It also works as a forward micro feed
button if the
button has been pressed.
By pressing this button, the printer either loads a new paper into the printer,
or ejects a paper that currently in the paper path of the printer. It also works
as the
button if the
button has been pressed.
It functions as to alternate the function of certain buttons to another. Holds
down this button in PAUSE mode for 5 seconds, the printer moves the carriage
to the ink cartridge installation/replacement position.
When you press this button, the printer is initialized.
It lights when the printer is in PAUSE mode.
It lights when the print data exists in the input buffer.
It lights when the printer is in out-of-paper condition. It blinks if the paper jam
has occurred.
It lights when the printer detects ink end of the ink cartridge. It blinks if the
ink level becomes low.
These LEDs shows the currently selected mode.
It indicates the currently selected font.
1 - 4
REV.-A
