Epson SC-S40600 Series, Руководство пользователя

Страница: 103 / 157

Details of the Menu
The Media Setup Menu
The Media Setup menu can be accessed directly by pressing the
M
button.
* indicates default settings.
Feed To Cut Position
Sends the end of the print to the cutting groove.
Easy Media Setup
You can quickly and easily register media settings using the Wizard to perform optimum printing according to the size
and type of the media being used.
U
“Saving New Media Settings” on page 45
Media Remaining
Item Parameter Explanation
Print Remaining Length Print Use Print Remaining Length to print the amount of media remaining on
the current roll before replacing it with another type of media. You can
then enter this number as the media the length the next time the roll is
used.
Length OFF, 1.0 to 100.0 m
(30
*
)
Enter a value for overall roll length between 1.0 and 100.0 m. You can set in
0.5 m increments. When you select
OFF , the following remaining amount
is not calculated.
❏
Display remaining amount of media on the control panel screen
❏
Display warning message for remaining amount of media
Remaining Alert
1 to 15 m (5
*
)
An alert will be displayed if the amount of media remaining reaches this
length. Choose from values between 1 and 15 m. You can set in 1 m
increments.
Customize Settings
Item Explanation
Current Settings
To change the currently selected setting, select Current Settings . When
changing specific media settings, select the setting number for the target
media.
1 to 30 (media setting number)
Media setting item
The manufacturer settings for each item differ depending on the [Media Type] selected. See the following for details on
the manufacturer settings for each media type.
U
“Media Settings List for Each Media Type” on page 134
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
103