D
Fully extend the output tray.
Extend the tray until you can see the line on the
left-hand side of the first section of the tray.
E
Load the paper vertically with the printable side
face up.
Load the paper at the right-hand side of the auto
sheet feeder.
Note:
If A3 or larger paper is not fed correctly, use the
paper support edge guide (a) shown in the following
illustration.
U
“Unable to feed or eject paper.” on page 111
F
Pinch the edge guide and slide it to fit to the width
of the paper.
When the paper is loaded correctly, the Paper
Setup screen is displayed.
U
“Displaying the Paper Setup Screen” on
Loading Fine Art Media
Use the front manual feed tray and the rear support to
load fine art media. You can load fine art media with a
thickness of 0.29 to 0.7 mm.
SC-P800 Series User’s Guide
Basic Operations
25
Содержание SC-P800 Series
Страница 1: ...User s Guide CMP0031 01 EN ...