Epson SC-F9300 series, Руководство пользователя

Страница: 41 / 146

F
Hold down the
d
button until the media is
taken up and wrap around the core once or twice.
Settings for Loaded Media
When you have finished loading the media, follow the
instructions on the control panel to make settings for
the loaded media.
1. Select the media setting number
Select the media setting number to which the print
settings have been registered.
2. Select the roll winding specifications
Select the roll type for the loaded media roll.
3. Set the media length
Set the length of the loaded media.
Buttons that are used in the following settings
A
Use the
d
/
u
buttons to select the media setting
number to which the print settings have been
registered, and then press the
Z
button.
OK
Done
1
2
3
4
5
Select Media
If media settings have not yet been made for
new media, select an unassigned number, finish
loading the media, and then perform Easy
Media Setup.
U
“Saving New Media Settings” on page 45
B
Use the
d
/
u
buttons to select the roll type that
matches the loaded roll, and then press the
Z
button.
OK
Done
Printable Side Out
Printable Side In
Roll Type
Back
SC-F9300 Series User's Guide
Basic Operations
41