2. OVERVIEW
6
EPSON
S1C33 Family In-Circuit Debugger
S5U1C33001H1400 Manual (Rev. 0.20)
*
3 Supports 32 kHz by firmware update.
*
4 Available only when the S1C33 model that supports the user logic signal trace function is used.
*
5 Supports by firmware update.
*
6 The product does not include a 30-pin cable for connecting to target systems or a connector for this cable. Please
contact us if you need a 30-pin cable.
Table 2 Correspondence between C33 cores and debug functions
Core
Function
C33 STDMini
C33 PE
C33 ADV
DCLK while the program is halted = Bus clock
= Core clock x set value
= Core clock x set value
DCLK while the program is being
executed
= Core clock
= Core clock
= Core clock
PC trace method
Level 1
Level 1
Level 2
Switching the DCLK-core clock
ratio
(DCLK while the program is
halted)
-
{
{
Address setup for the debug unit
-
{
-
Area break function
-
-
{
Bus break function
-
-
{
Bus break trigger trace function
-
-
{
TRC IN pin input signal trace
function
- -
{
User logic signal trace function
*
7 -
-
{
Use of MMU in debug mode
-
-
{
*
7 Available only in S1C33 models that support the user logic signal trace function.
Except for the PC trace, Level 2 is upwardly compatible with Level 1 and realizes higher analytical accuracy than Level 1.
Functions not listed in the above table can be used regardless of the core model.
2.2 Operating
environment
As the host computer, the S5U1C33001H1400 uses a PC with a USB port (USB 1.1) available.
Windows 2000 or Windows XP is recommended for the OS.
