199
Note:
To reset all saved memories of all types, select
Reset All Memories
in the Reset menu.
7.
Press
Menu
or
Esc
to exit.
Parent topic:
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
You cannot schedule an event to occur at the following times:
• Five minutes before or after a Color Calibration event
• Five minutes before or 30 minutes after a Screen Matching event
Note:
Light Source Calibration events do not start if the projector is used continuously for more than 24
hours, or regularly turned off by shutting off the power outlet. Set
Light Source Calibration
events to
occur only after 100 hours of projector usage.
1.
Press the
Menu
button.
2.
Select the
Extended
menu and press
Enter
.
3.
Select the
Schedule Settings
setting and press
Enter
.
4.
Select the
Schedule
menu and press
Enter
.
5.
Select
Add New
and press
Enter
.
6.
In the Event Settings section, select the events you want to have occur. (Select
No Change
for
events that you do not want to occur.)
7.
In the Date/Time Settings section, set the date and time for the scheduled events to occur.
8.
When you are finished, select
Save
and press
Enter
.
9.
To schedule more events, repeat the previous steps as necessary.
10. Select
Setup complete
and select
Yes
to save your changes.
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Viewing Scheduled Events
You can view any currently scheduled events.
Содержание Pro L1500UH
