manualshive.com logo in svg

Epson PriorityFAX 3000, Руководство пользователя, Страница: 83 / 122

Поделиться
Скачать
Epson PriorityFAX 3000 Скачать руководство пользователя страница 83

Using the PriorityFax Advanced Features

Using Delayed Send

The Delayed Send feature allows you to send documents when

you are out of the office and when telephone rates are lower. To

use Delayed send, follow these steps:

Insert a document face down into the feeder.

S. DIAL

Press FUNCTION.

Press 3 for Delayed Send.

Press the # cursor key to turn delayed sending on:

DELAYED

SENDING

ON

Press SET.

DELAY TIME

0 00:00

Use the keypad to select the day and time to send. For 0 (day),

enter a number from 0 to 7, where 0 is today, 1 is tomorrow, 4 is

four days from now, etc. For 00:00, enter the hour and minutes

using a 24-hour clock; for example, 01:20 is 1:20 a.m. and 14:03 is

2:03 p.m.

Press SET. If you have not already used the 

PriorityFax's memory

for another purpose, such as storing 

a 

confidential document that

you have not yet printed out, you see the following display:

4-19

Содержание PriorityFAX 3000



























































































































Отзывы:

Нет отзывов