Epson PowerLite W16SK Скачать руководство пользователя страница 119

Страница: 119 / 179

Solutions to Projector Power or Shut-Off Problems

If the product does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:

• Make sure the power cords are securely connected to the product and to a working electrical outlet.

• The product's buttons may be locked for security. Unlock the buttons or use the remote control to turn

on the product.

• The power cords may be defective. Disconnect the cords and contact Epson.

• If the product's lamps shut off unexpectedly, it may have entered sleep mode after a period of

inactivity. Begin a presentation to wake the product.

• If one of the projector's lamps shuts off and the power and

Temp

lights are red, the projector has

overheated and shut off. Check the solutions for this light status.

• If the power button on the remote control does not turn on the product, check its batteries and make

sure the

Remote Receiver

setting is turned on in the product's menu, if available.

If the commander and receiver projectors do not come on at the same time, try the following solutions:

• Make sure the projectors are connected with the USB cable. See your

Setup Guide

for instructions.

• Make sure the projectors'

Stack Mode

settings are set to

• If an error occurs in the commander projector, the receiver projector displays a warning message.

Press the

Enter

button on the remote control to turn off the receiver projector. Stop using the

commander projector and contact Epson for help. To turn on and use the receiver projector by itself,
hold down the

button on the remote control and press the power button.

• If an error occurs in the receiver projector, the commander projector displays a warning message. You

can continue to use the commander projector. Stop using the receiver projector and contact Epson for
help.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Light Status
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Where to Get Help

Related tasks

Unlocking the Projector's Buttons

119

Содержание PowerLite W16SK




















































































































































































Результаты поиска

Содержание PowerLite W16SK

Отзывы:

Epson PowerLite W16SK, Руководство пользователя, Страница: 119 / 179

Результаты поиска

Содержание PowerLite W16SK

Отзывы: