6. Loosen the three screws holding the lamp in place (you can’t remove them).
7. Grasp the wire handle and pull the lamp straight out.
Caution:
Avoid touching the glass portion of the lamp. Oils transferred from your hands can cause the lamp to
overheat and fail prematurely.
8. Hold the shutter open, and use a vacuum cleaner to remove any dust from the wire mesh filters
inside.
9. Insert the lamp back into the projector, tighten its screws, and replace the lamp cover.
2
1
Epson is a registered trademark of SEIKO EPSON CORPORATION.
PowerLite is a registered trademark of Epson America, Inc.
© 2003 Epson America, Inc. 12/03
Printed in XXXXXX
CPD-17590
