Epson PowerLite 84, Руководство пользователя

Страница: 91 / 123

Solving Problems
91
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following table for a complete description of the
projector’s status lights:
Temperature
light
Lamp light
Power light
Status lights
Light Status Description
Orange The projector is in sleep or standby mode. You can unplug it or press the
P
power button to turn it on.
Flashing
green The projector is warming up. Wait for the image to appear.
Green The projector is operating normally.
Flashing
orange The projector is cooling down or preparing network monitoring. You can’t
turn it back on (and you should not unplug it) until the light stops flashing
and remains orange.
Red or
flashing red There is a problem with the projector. Check the other two lights and the
information on page 91 to diagnose the problem.
Flashing red There is a problem with the fan or temperature sensor. The air filter or
vent may be clogged. Clean them or replace the air filter as described on
page 79.
If this does not resolve the problem, stop using the projector, disconnect
the power cable, and contact Epson as described on page 102.