Epson PowerLite 5600p, Руководство пользователя

Страница: 40 / 114

34
Using the Remote Control
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the
volume, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, or display a picture-in-picture video image.
Make sure you have set up your projector and connected your audio
or video source as described in Chapter 1 or Appendix A.
Switching Between Picture Sources
If you’ve connected your projector to more than one computer and/or
video source, you can use the buttons on the remote control (or the
control panel) to switch between the different sources.
■
Press the
Video
button to switch between a standard composite
video source and an S-Video source.
■ Press the
Comp1
button to select your first computer.
■
Press the
Comp2/YCbCr
button to select your second computer
or a component video source.
After you select a source, the screen goes dark for a moment before the
image appears.
Adjusting the Volume
If you’ve connected an audio source to the projector, you can adjust
the sound that’s output through the projector’s speakers.
■ To increase the volume, press on the right (
+
) side of the
Volume
button.
■
To reduce the volume, press on the left (
–
) side of the
Volume
button.
E@sy-MP
select video
source
select
computer 1
select
computer 2
or
component
video
adjust
volume
5600 and 7600.book Page 34 Thursday, December 14, 2000 2:46 PM