Epson PowerLite 450W, Руководство пользователя

Страница: 88 / 174

88
Using the Projector on a Network
5. For the WEP encryption setting, select
128Bit
or
64Bit
and press
Enter
.
6. For Format, highlight
ASCII
to enable text input or
HEX
to
enable hexadecimal input, then press
Enter
.
7. If you chose
64Bit
, choose
Encryption key 1
,
2
,
3
, or
4
.
Highlight the
Encryption key
text box that corresponds to the
Key ID you selected, then press
Enter
. Use the arrow buttons to
select individual letters; then press
Enter
to input a character. To
add a blank space or to navigate backward and forward through
the input text, highlight the arrows and press
Enter
. To toggle
symbol settings or capital letters, highlight the option and press
Enter
. When you’re done, highlight
Finish
and press
Enter
.
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■
For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■
For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■
For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■
For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. For Authentication Type, select
Open
or
Shared
, depending on
the setting your network uses.
10. When you’re done making these settings, press
Esc
. Highlight the
Return
button at the top of the screen, then press
Enter
. Choose
Complete
and press
Enter
, then choose
Yes
and press
Enter
to
save your settings.
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn’t work,
try Text2 and then Text3.