background image

Notices

165

(d)

If the Work includes a "NOTICE" text file as part of its distribution, then any 
Derivative Works that You distribute must include a readable copy of the 
attribution notices contained within such NOTICE file, excluding those 
notices that do not pertain to any part of the Derivative Works, in at least 
one of the following places: within a NOTICE text file distributed as part of 
the Derivative Works; within the Source form or documentation, if provided 
along with the Derivative Works; or, within a display generated by the 
Derivative Works, if and wherever such third-party notices normally appear. 
The contents of the NOTICE file are for informational purposes only and do 
not modify the License. You may add Your own attribution notices within 
Derivative Works that You distribute, alongside or as an addendum to the 
NOTICE text from the Work, provided that such additional attribution 
notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may 
provide additional or different license terms and conditions for use, 
reproduction, or distribution of Your modifications, or for any such Derivative 
Works as a whole, provided Your use, reproduction, and distribution of the Work 
otherwise complies with the conditions stated in this License.

5.

Submission of Contributions. Unless You explicitly state otherwise, any 
Contribution intentionally submitted for inclusion in the Work by You to the 
Licensor shall be under the terms and conditions of this License, without any 
additional terms or conditions.

Notwithstanding the above, nothing herein shall supersede or modify the terms 
of any separate license agreement you may have executed with Licensor 
regarding such Contributions.

6. 

Trademarks. This License does not grant permission to use the trade names, 
trademarks, service marks, or product names of the Licensor, except as 
required for reasonable and customary use in describing the origin of the Work 
and reproducing the content of the NOTICE file.

7. 

Disclaimer of Warranty. Unless required by applicable law or agreed to in 
writing, Licensor provides the Work (and each Contributor provides its 
Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS 
OF ANY KIND, either express or implied, including, without limitation, any 
warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, 
or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for 
determining the appropriateness of using or redistributing the Work and assume 
any risks associated with Your exercise of permissions under this License.

8.

Limitation of Liability. In no event and under no legal theory, whether in tort 
(including negligence), contract, or otherwise, unless required by applicable law 
(such as deliberate and grossly negligent acts) or agreed to in writing, shall any 
Contributor be liable to You for damages, including any direct, indirect, special, 
incidental, or consequential damages of any character arising as a result of this 
License or out of the use or inability to use the Work (including but not limited to 
damages for loss of goodwill, work stoppage, computer failure or malfunction, 
or any and all other commercial damages or losses), even if such Contributor has 
been advised of the possibility of such damages.

Содержание PowerLite 450W















































































































































































Отзывы: