Epson PhotoPC L-400, Руководство пользователя

Страница: 111 / 116

109
LIST OF ERROR MESSAGES
MESSAGE PROBLEM & SOLUTION
Printer error. Problem:There may be a problem with the printer.
Solution:Turn the printer off for a few seconds then turn the power
back on. If the error message still appears, turn the power
off and check to see if there is anything (packing materials,
paper) stuck inside the printer. Then turn the power back
on.
There is no response from
the printer.
Problem:The printer has frozen and won't communicate with the
camera.
Solution:Check the camera to printer connection. Check that the
printer power is turned on. See the printer instruction
booklet for further details.
Could not print.Try printing
again?
Problem:If the printer is in the middle of printing something, it may
not be able to accept the next request.
Solution:Restart the printer or wait until the current print run is
finished and then try again.
Could not print. Problem:The printer has rejected the print request.
Solution:If neither of the above works, see the printer instruction
booklet for further remedies.Restart the printer or resend
the request from the camera. If none of these remedies
work, contact your nearest Epson Customer Support.
A communication error has
occurred.
Problem:Either the cable has been disconnected or the power has
been turned off.
Solution:Recheck that the cable is connected, turn the power back
on and try again.
xx images could not be
printed.
Problem:If some of the images were taken with another camera or
have been changed by software, only the images taken
with this camera will be printed.
Solution:Use the actual camera or computer that was used to create
the images in order to print them.
Cannot print because the
necessary Frame file does
not exist or is corrupted.
Problem:The picture can't be printed because there is no frame file
or the link has been broken.
Solution:Replace or add a frame linked to this file. (See page 49.)
This function cannot be
performed from the camera
with the printer you are
using.
Problem:The printer does not support this function.
Solution:You can try to clean it in some other way, but the printer
doesn't support the camera's function.
This printer is not
supported.
Problem:The printer isn't made for direct printing.
Solution:Make sure the printer supports direct printing before you
buy it.
Parts inside your printer
require maintenance.
Problem:The printer cannot print because the components within
the printer needs adjusting.
Solution:Turn the printer off for a few seconds then turn the power
back on. If the error message still appears, consult the
shop you bought your printer from or the Epson Customer
Support.