Epson Perfection V350 Series Скачать руководство пользователя страница 2

Epson Perfection V350 Photo

2 - Epson Perfection V350 Photo

8/06

Mechanical

Electrical

Note: 

Check the label on the AC adapter or on the back of the scanner for 
voltage information.

Scanner

AC Adapter (A391UC)

Environmental

USB Interface

Standards and Approvals

Scanner

AC Adapter

Using the Scanner Buttons

Before using the scanner buttons, make sure you have installed 
Epson Scan and the other software that came with the scanner. 
For details on using the buttons, see the 

Start Here

 sheet.

Scanning resolution

4800 dpi (main scan)
9600 dpi with Micro Step Drive

 

(sub scan)

Output resolution

50 to 6400, 9600, and 12800 dpi 
(50 to 6400 dpi in 1 dpi increments)

Scanning speed
(reflective)

Approximately 4.6 msec per line at 
600 dpi
Approximately 21.5 msec per line at 
4800 dpi

Image data

16 bits per pixel per color internal
16 bits per pixel per color external 
(maximum)

Interface

One USB 2.0 Hi-speed port

Light source

White cold cathode fluorescent lamp

Dimensions

Width: 16.9 inches (430 mm)
Depth: 11 inches (280 mm)
Height: 2.9 inches (73 mm)

Weight

Approx. 6.2 lb (2.9 kg)

Rated voltage

DC 13.5 V

Rated current

1.5 A

Power consumption

20 W operating 
13.5 W stand-by mode
4.1 W sleep mode

Rated input voltage

AC 100 to 120 V

Rated input current

0.6 A

Rated  frequency

50 to 60 Hz

Rated output voltage DC 13.5 V

Rated output current 1.5 A

Temperature Operating 41 to 95 °F (5 to 35 °C)

Storage

–13 to 140 °F (–25 to 60 °C)

Humidity

Operating 10 to 80%, without condensation

Storage

10 to 85%, without condensation

Operating 
conditions

Ordinary office or home 
conditions. Avoid operating the 
scanner in direct sunlight, near a 
strong light source, or in extremely 
dusty conditions.

Interface type

Universal Serial Bus Specification Revision 
2.0

Interface standard Full Speed mode (12 Mbits per second) 

and Hi-Speed mode (480 Mbits per 
second) of Universal Serial Bus 
Specification Revision 2.0.

Connector type

One Type B port

EMC

FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B

Safety

UL60950-1
CAN/CSA-22.2 No. 60950-1

EMC

FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR22 Class B

Button

Function

]

 Start

Scans and saves the captured image or document.

{

 Copy 

Scans and sends the captured image or document 
to the Epson Copy Utility.

|

 Scan to 

E-mail

Scans and sends an e-mail message with the 
scanned image or document attached.

a

 Scan to PDF

Scans an image or document and saves it as a PDF 
file.

Содержание Perfection V350 Series











Отзывы: