❏
In Network Scanning Settings, check that the Group settings for Document Capture Pro are the same as the
settings for Network Interface Unit.
U
See the Document Capture Pro help for more details.
U
“Scanning from the Network Interface Unit (for Windows)” on page 17
❏
Check that Document Capture Pro is not being blocked by a Firewall.
U
See the user’s guide of the scanner for more details.
❏
Check that the IP address is set correctly.
U
See the user’s guide of the scanner for more details.
❏
Check that there are several network interface unit (scanner) on the network.
On your computer, recognise the scanner using MAC address of this product.
U
“Environment menu” on page 18
Cannot automatically connect to the network.
❏
If your network environment supports DHCP, contact your network administrator. If your network
environment does not support DHCP, set the IP address manually.
U
“Connecting to an IPv4 Network Manually” on page 11
Web-based EpsonNet Config cannot be started or be made settings.
❏
Check that IPv4 address is set to this product.
To start Web-based EpsonNet Config, set IP address first. You can set from this product control panel or from
EpsonNet Config for Windows/Macintosh.You can check the current setting from the control panel menu.
U
“Menu List” on page 18
Network Interface Unit User's Guide
Troubleshooting
22
