Epson MX-80F/T, Руководство по эксплуатации

Страница: 33 / 59

8. Setting of DIP Switches
There are two DIP switches on the control circuit board. In order to suit the
user’s specific requirements, desired control modes are selectable by the DIP
switches. The functions of the switches and their preset conditions at the time
of shipment are as shown in Table 2 (DIP Switch 1) and Table 3 (DIP Switch 2).
DIP Switch 2 DIP Switch 1
Fig. 31
Location of DIP Switches
Table 2 Functions and Conditions of DIP Switch 1
Pin No. Function
ON OFF
Factory-set
Condition
1
Not applicable
ON
2 CR
Print & Line Feed
Print only
Print &
Print only line feed
ON
3
Buffer full
Print & Line Feed
Print only
Print &
Print only
line feed
ON
4 Cancel code
Valid
Invalid
Invalid
Valid OFF
5
Delete code
Valid
Invalid
Invalid Valid ON
6 Error
Buzzer Sounds
Does not sound ON
Character generator Japanese Graphic
7
Graphic patterns select
syllabary
patterns
OFF
Japanese syllabary select
select
select
Fixed internally
Fixed
Not fixed ON
Not fixed internally
- 2 7 -