Configuring the printer
Configuring the printer
3-7
3-8
-
Print Quality
-
Page Length
(only for fanfold paper)
Three different print quality levels can be selected:
Page length is expressed in terms of lines within the range of 5 to 132 lines.
-
Draft quality (font "Data")
Any page length setting is based on six lines per inch, regardless of the
-
Near letter quality (NLQ displayed with the font name)
number of lines per inch selected in the line setting or defined by the
-
Letter quality (LQ displayed with the font name).
application.
Different print qualities result in different print speed.
-
Sub/Super Font
When the SUB/SUPER FONT is set to "
NO
", sub and superscript text will be
Paper length
Appropriate setting
raised or lowered a half line, but the text size itself will not change.
in inches
in no. of lines
When set to "
YES
", the text size will be reduced, and printed above or below
the line.
4
24
Example:
YES
5 or 5
4 /
25
2
2
NO
5 or 5
6
36
2
2
-
Pitch
8 /
51
Indicates the number of characters printed per inch (10, 12, 15, 17, 18, 20 or
11
66
proportional).
11 /
70
Any pitch setting can be combined with any available font. In some cases this
12 (default setting)
72
may conflict with font designs. The pitch setting is, therefore, a matter of
personal taste.
The page length setting is the basis from which perforation skip, TEAR-OFF
-
Line
Determines the number of lines per inch (line space).
An incorrect page length, therefore, gives an incorrect perforation skip.
The following indicates the number of lines for the most common paper sizes.
1
6
8
48
1
2
2
3
or CUT mode and margins operate.
Содержание MTX 1345
Страница 61: ...14073 Appendix A to G for Printer ...
