F
Set the printer driver.
❏
If the printer driver is already installed:
Select
Manufacturer
and
Printers
. Click
Next
.
❏
If the printer driver is not installed:
Click
Have Disc
and then insert the software disc supplied with the printer. Click
Browse
, and then
select the folder on the disc containing the printer driver. Make sure you select the correct folder. The
location of the folder may change depending on your operating system.
32 bit version of Windows: WINX86
64 bit version of Windows: WINX64
G
Follow the on-screen instructions.
When using the printer under the server / client connection (printer sharing using the Windows server), make the
sharing settings hereafter.
Related Information
&
“Sharing the Printer” on page 23
Checking the Port Configuration - Windows
Check if the correct port is set for the print queue.
A
Open the devices and printers screen.
Click start >
Windows System
>
Control Panel
>
Hardware and Sound
>
Devices and Printers
.
B
Open the printer properties screen.
Right-click the printer icon, and then click
Printer properties
.
C
Click the
Ports
tab, select
Standard TCP/IP Port
, and then click
Configure Port
.
D
Check the port configuration.
❏
For RAW
Check that
Raw
is selected in
Protocol
, and then click
OK
.
❏
For LPR
Check that
LPR
is selected in
Protocol
. Enter "PASSTHRU" in
Queue name
from
LPR Settings
. Select
LPR Byte Counting Enabled
, and then click
OK
.
Sharing the Printer
When using the printer under the server / client connection (printer sharing using the Windows server), set up the
printer sharing from the print server.
A
Select
Control Panel
>
View devices and printers
on the print server.
Network Guide
Function Settings
23