Epson LQ-2180, Руководство по обслуживанию

Страница: 34 / 56

LQ-2180 Revision A
Adjustment Overview 34
Figure 4-2. Destination Selection Screen
8. Check the printer to be adjusted for the destination; NLSP or
Standard, then select the destination and press the Enter key.
9. The following screen appears.
Figure 4-3. Main Menu Selection Screen
10. Select “Perform”. The following screen appears.
Figure 4-4. Main Menu Screen
C A U T I O N
Be sure to select the proper destination. If you select
“Standard” despite you printer is NLSP version, the
printer may not print NLSP characters.
< * > < * > < * > E P S O N S I D M P r i n t e r S e r v i c e P r o g r a m b o o t p r o c e s s < * > < * > < * >
S e l e c t t h e d e s t i n a t i o n .
S t a n d a r d
N L S P
E S C : Q u i t U P / D o w n : S e l e c t E N T E R : D e t e r m i n e
C A U T I O N
„
Select “No” if you have input a wrong model name in
the screen shown in Figure 4-1.
„
If you select “Got”, the printer flashes the model
name stored in the RAM to the EEPROM once and
reads it again.
< * > < * > < * > E P S O N S I D M P r i n t e r S e r v i c e P r o g r a m b o o t p r o c e s s < * > < * > < * >
D o y o u s t a r t t h e S e r v i c e P r o g r a m ?
P e r f o r m ( B o o t t h i s P R O G R A M )
N o ( R e - s e l e c t m o d e l n a m e )
G o t ( C h e c k t h i s m o d e l n a m e )
E S C : Q u i t U P / D o w n : S e l e c t E N T E R : D e t e r m i n e
* * * * * * * * * * * * * * L Q - 2 1 8 0 S E R V I C E P R O G R A M V e r s i o n 1 . 0 * * * * * * * * * * * * * *
< > < > S E R V I C E I T E M S < > < >
1 . B i - D A d j u s t m e n t
2 . P r i n t D a t a o n E E P R O M
3 . S e t o r r e p l y S t a r t i n g d a t e
4 . T P E R e s e t
E S C : Q u i t U P / D o w n : S e l e c t E N T E R : D e t e r m i n e
http://www.4008109977.com guangzhou epson service :020-84207330