Epson LQ-2070 страница 119 Скачать руководство пользователя

Страница: 119 / 173

Continuous paper does not feed properly

The tractor does not feed the paper.

Check that the paper release lever is pulled forward to the
continuous paper position. If not, move the lever to the correct
position.

The paper may have come off the tractor. Re-attach the paper to
the tractor.

Paper feeding is crooked or the paper jams.

Make sure the paper guide is in the upright position, and the
paper release and paper thickness levers are set correctly.

The position of your paper supply may be preventing it from
feeding straight. Make sure the paper supply is not obstructed.

Make sure your paper supply is positioned within 1 meter
(3 feet) of the printer.

Make sure the printer cover is closed.

Make sure the tractor is installed correctly.

Check that the holes on the sides of the paper are aligned with
each other. Also, make sure the sprockets are locked and their
covers are closed.

Check that the paper size and thickness are within the specified
ranges. See the paper specifications in the Appendix.

The pull tractor and push tractor sprockets are not aligned
correctly. When using both tractors, be sure that the sprockets
on both are positioned evenly.

Sunflower-P

Rev.c

A5 size

Chapter 6

01/09/96

pass 1

6-8

Troubleshooting

Содержание LQ-2070














































































































































































Результаты поиска

Содержание LQ-2070

Отзывы:

Похожие инструкции для LQ-2070

Бренды по названию

Популярные бренды

Epson LQ-2070, Руководство пользователя

Результаты поиска

Содержание LQ-2070

Отзывы:

Похожие инструкции для LQ-2070

Бренды по названию

Популярные бренды