Epson LightScene EV-100 Скачать руководство пользователя страница 145

Страница: 145 / 189

145

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance
Replacing the Remote Control Batteries
Transporting the Projector

Projector Maintenance

Your projector needs little maintenance to keep working at its best.

You may need to clean the lens periodically, and clean the air vents to prevent the projector from
overheating due to blocked ventilation.

The only parts you should replace are the remote control batteries. If any other part needs replacing,
contact Epson or an authorized Epson servicer.

This projector uses a sealed laser light source which does not need servicing and cannot be replaced.

Warning:

Before cleaning any part of the projector, turn it off and unplug the power cord. Never open

any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages
in the projector can injure you severely.

Warning:

Do not try to service this product yourself, except as specifically explained in this manual.

Refer all other servicing to qualified servicers.

Cleaning the Lens
Cleaning the Projector Case
Cleaning the Air Vents

Parent topic:

Maintaining and Transporting the Projector

Cleaning the Lens

Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

• To remove dust or smudges, gently wipe the lens with a soft, lint-free cloth.

Содержание LightScene EV-100






























































































































































































Результаты поиска

Содержание LightScene EV-100

Отзывы:

Epson LightScene EV-100, Руководство пользователя, Страница: 145 / 189

Результаты поиска

Содержание LightScene EV-100

Отзывы: