Epson LightScene EV-100 Скачать руководство пользователя страница 122

Страница: 122 / 189

122

Copying Menu Settings Between Projectors

After you select menu settings for your projector, you can transfer them to another projector of the same
model.

Note:

Copy the projector's settings before you adjust the projected image using the projector's image

adjustment settings. Any saved User's Logo setting on the projector will transfer to the other projector.

Caution:

If the copy process fails due to a power failure, communication error, or for any other reason,

Epson will not be responsible for any repair costs incurred.

The following settings will not transfer between projectors:

• Network menu settings other than those in the Notifications and Others menus

Note:

In addition to the methods covered in this section, you can also copy and transfer settings to

multiple projectors over a network using the EasyMP Network Updater software. See the online

EasyMP

Network Updater Operation Guide

for instructions. You can download the latest software and

documentation from the Epson website.

Saving Settings to an SD Card
Transferring Settings from an SD Card

Parent topic:

Adjusting Projector Features

Related references

Additional Projector Software and Manuals

Saving Settings to an SD Card

You can save the projector settings you want to transfer to an SD card.

Note:

Use an empty SD card. If the card contains other files, the transfer may not complete correctly.

The SD card cannot have any security features and must be an SDHC card of Class 10 or higher with a
maximum capacity of 32GB, or an SD card formatted in FAT16 or FAT32.

Turn off the projector and unplug the power cord from the projector's power inlet.

Содержание LightScene EV-100






























































































































































































Результаты поиска

Содержание LightScene EV-100

Отзывы:

Epson LightScene EV-100, Руководство пользователя, Страница: 122 / 189

Результаты поиска

Содержание LightScene EV-100

Отзывы: