22
|
Special Format Labels
Flag label tips
■
When labeling cables with a flag label,
set a specific length for the label. If you
use the “Auto” feature, the text will be too
close to the center of the label and you
will not have enough extra tape to wrap
around the cord.
■
When adhering the flag label to the
cable, loop the label around the cord
loosely and stick the ends of the label
together, then move inwards toward the
cable. This makes it easier to align the
ends.
■
Add an extra inch or more to your flag
label to allow enough blank label to wrap
around the cord.
■
The starting and ending half-inch of
empty label cannot be reduced. To
remove them, trim the excess label.
■
If space is limited, use narrower tapes
(such as 9 mm and 6 mm widths).
Wrapped labels
Wrapped labels are useful for tight spaces
where flags are too large or only a short
identifier is necessary.
1. Press .
2. Press
until you see
Wrap
, then press
to select it.
3. Press
to select the length, then press
.
4. Enter your text, then press
.
Wrap label tips
■
For small cables (1-2 mm), use a flag label
to increase readability.
safety.book Page 22 Wednesday, May 22, 2013 4:28 PM
