Troubleshooting
51
Troubles with the Bulk label quick kit
Symptom/Question
Solution
The tape of Bulk label quick
kit has come off the cartridge.
Reset the tape to the cartridge.
U
"Passing Tape of Bulk Label Quick Kit (Option) Through the Cartridge" on page
The Bulk label quick kit has
run out of tape.
Remove the box of Bulk label quick kit from the base plate, and set a box of new
Bulk label quick kit to the base plate.
The tape is not fed correctly.
Make sure that tape is not getting stuck or tangled inside the box.
When using the Bulk label quick kit, make sure to set it on the base plate.
Poor print quality
If the kit is used in a dusty area, print quality may drop due to dust adhered to the
tape. When you finished printing labels, put the cartridge back into the box and
then close the box.
When you set the cartridge to the printer, or when fixing stuck tape, be careful not
to touch the print side of the tape with your fingers. You may get smeared
printouts especially when you have touched the print side with oily or hand-
cream-applied bare hands.
