Epson LabelWorks Iron-on Kit, Руководство пользователя

Страница: 22 / 40

20 | Adjusting the Display
3. Press to change from Narrow to
Wide , then press .
Selecting narrow characters
You can change from normal characters and
symbols to narrow ones.
1. Press .
2. Press until you see Narrow , then
press to select it.
3. Press again to select Narrow .
Increasing print density
You can make your labels darker if necessary.
1. When the power is off, press + .
Print density appears on the display.
2. Press .
3. Press to adjust the print density, then
press to select the density you want.
Note: The default value (0) is recommended.
Adjusting the Display
You can adjust the following display settings:
Contrast: Adjusts the density of the fonts on
the display.
Language: Changes the language of the
settings and messages on the display.
inch:cm: Selects the unit of measurement.
1. Press + .
2. Press to highlight a setting, then
press to select it.
3. Press to highlight the option you
want, then press to select it.