background image

2

   TM-J2000/J2100 User’s Manual

English

Safety Precautions

This section presents important information intended to ensure 
safe and effective use of this product. Please read this section 
carefully and store it in an accessible location.

WARNING:

Shut down your equipment immediately if it produces smoke, a strange 
odor, or unusual noise. Continued use may lead to fire. Immediately 
unplug the equipment and contact your dealer or a SEIKO EPSON 
service center for advice.

Never attempt to repair this product yourself. Improper repair work can 
be dangerous.

Never disassemble or modify this product. Tampering with this product 
may result in injury or fire.

Be sure to use the specified power source. Connection to an improper 
power source may cause fire.

Do not allow foreign matter to fall into the equipment. Penetration by 
foreign objects may lead to fire.

If water or other liquid spills into this equipment, unplug the power cord 
immediately, and then contact your dealer or a SEIKO EPSON service 
center for advice. Continued usage may lead to fire.

CAUTION:

Do not connect cables in ways other than those mentioned in this 
manual. Different connections may cause equipment damage and 
burning.

Be sure to set this equipment on a firm, stable, horizontal surface. 
Product may break or cause injury if it falls.

Do not use in locations subject to high humidity or dust levels. Excessive 
humidity and dust may cause equipment damage or fire.

Do not place heavy objects on top of this product. Never stand or lean 
on this product. Equipment may fall or collapse, causing breakage and 
possible injury.

To ensure safety, unplug this product before leaving it unused for an 
extended period.

Do not use aerosol sprayers containing flammable gas inside or around 
this product. Doing so may cause fire.

Caution for the Ink Cartridge

Keep the ink cartridge out of the reach of children. 

Содержание J2100 - TM Color Inkjet Printer















Отзывы: