Epson GT-9000, Руководство по обслуживанию

Страница: 13 / 41

EPSON GT-9600 Revision A
Product Description Interface 7
byte data
0 03h Peripheral devise type: : 3(Processor)
1 00h RMB : : 0
device Type restriction: : 0
2 02h ISO Version : : 0
ECMA Version : : 0
ANSI Version : : 2
3 02h AENC : : 0
TrmI0P : : 0
Response data format: : 2
4 23h
5 00h
6 00h
7 00h
Vender unique parameter byte:
’EPSON’, 20h, 20h, 20h
’SCANNER’, 20h, ’xxxxxxxx’, 20h, ’****’,
00h, 00h, 00h, FFh]
Note: ’****’ ROM version
†
Status: All bits are defined as follows.
Table 1-3. Status
NOTE: R: means reserved bit.
Table 1-4. Message
NOTE: Out: Target → Initiator
In: Initiator → Target
Status Bits
Status 7 6 5 4 3 2 1 0
Good R R 0 0 0 0 0 R
Check
Condition
R R 0 0 0 0 1 R
Busy R R 0 0 1 0 0 R
Message Code Direction Completion of ATN
Command Complete 00h In --
Extended Messages 01h In/Out --
Save Data Pointer 02h In --
Restore Pointer 03h In --
Disconnect 04h In --
Initiator Detect Error 05h Out Yes
Abort 06h Out Yes
Message Reject 07h In/Out Yes(Out)
No Operation 08h Out Yes
Message Parity Error 09h Out Yes
Bus Device Reset 0Ch Out Yes
Identify 80h-FFh In/Out No(Out)