5. Press the
LF/FF
D
button to move the top-of-form position up
on the page, or press the
Load/Eject
U
button to move the
top-of-form position down on the page.
c
Caution
:
Never use the knob to adjust the top-of-form position; this
may damage the printer or cause it to lose the top-of-form
position.
Note:
R
The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the
printer beeps and stops moving the paper.
R
When the paper reaches the default top-of-form position,
the printer also beeps and stops moving the paper briefly.
You can use the default setting as a reference point when
adjusting the top-of-form position.
plastic ribbon
cover
3-6anew
L
Sun-G+
Rev.C
A5 size
Chapter 2
97/11/17
pass 3
2-38
Printing on Continuous Paper
