116
Related references
Back of Original Image Appears in Scanned Image
If an image from the back of a thin original appears in your scanned image, make sure you selected the
correct Image Type setting for your original and select the
Text Enhancement
setting in Epson Scan.
Parent topic:
Solving Scanned Image Quality Problems
Related references
Scanned Characters are Blurry
If characters in your scanned images are blurry, try these solutions:
• Make sure you do not move the scanner or original while scanning.
• Operate the scanner on a flat, stable surface.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select the
Text Enhancement
setting.
• Adjust the
Threshold
setting.
• Increase the
Resolution
setting.
Parent topic:
Solving Scanned Image Quality Problems
Related references
Characters are not Recognized During Conversion to Editable Text (OCR)
If characters in your scanned images are not recognized during OCR conversion, try these solutions:
• Make sure your original is straight.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select
Text Enhancement
• Select the correct
Image Type
setting
• Adjust the
Threshold
setting
• Set the scanning resolution between 200 and 600 dpi.
Содержание FF-640
