The
POWER
light does not come on.
Make sure the
power cable is correctly plugged into the scanner
and the power outlet.
The
READY
light does not come on.
Make sure the scanner is correctly connected to the computer
and that the computer is turned
on.
The scanner does not start scanning.
See that the
scanner’s
READY
light is on.
Make sure that you have selected the correct interface port and
settings with your software. Also make sure the interface board
on
your computer is properly installed.
If you are connecting the scanner with the SCSI interface, see
that the terminator and SCSI ID are correctly set up.
If you have other expansion boards in your computer, see that
they
are not interfering with the interrupt setting of the
interface board for your scanner. (See your computer manual.)
4-4
Troubleshooting and Maintenance
Содержание ES-800C
Страница 1: ...EPSON User s Guide 4001696 COl 00 ...
Страница 3: ...EPSON ES 800C Scanner User s Guide ...
Страница 64: ...Appendix Scanner Functions A 2 How the scanner works A 2 Scanner settings A 3 Appendix A 1 ...
Страница 89: ...Epson America Inc 20770 Madrona Avenue Torrance California 90503 Printed in Japan 92 C ...