44
Manually Connecting to a Wi-Fi Network
Wi-Fi Protected Setup (WPS)
Setting Up Network Scanning
Parent topic:
Manually Connecting to a Wi-Fi Network
You can manually connect the scanner to a Wi-Fi network by entering the network names (SSIDs) and
passwords for your wireless network router and scanner (ES-500W/ES-500WR). You must have a
computer with a wireless adapter to set up the connection. Also make sure you have installed the
scanner software as described on the scanner
Start Here
sheet.
Note:
For best results, re-install your scanner software and follow the on-screen instructions to connect
to a network.
1.
Make a note of the SSID and password shown on the label on the back of the scanner.
2.
Turn on the scanner.
3.
Press the
Wi-Fi button on the scanner's control panel.
4.
From your computer or device, open the list of wireless networks and select the SSID shown on the
scanner label. Then select the connect option.
5.
Enter the password shown on the scanner label.
The
AP mode light comes on in blue, indicating an AP mode connection.
6.
Connect your computer or device to the wireless network.
Wait for the
Wi-Fi light on the scanner to stop flashing and stay on, indicating that the scanner is
connected to the network.
7.
Select the link below to set up network scanning. You must set up network scanning to connect your
computer and wireless scanner.
Parent topic:
Connecting to an Existing Wi-Fi Network
Related tasks
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router, you can quickly connect your scanner to the
network using Wi-Fi Protected Setup (WPS).
Содержание ES-400
