Epson EPL-N4000+, Руководство по установке

Страница: 24 / 81

18
Installing the Options
3
Installing the Options
You can install the memory module, ROM module, Hard Disk
Drive, Interface Card, Duplex Unit, Face-up Tray, Multibin Unit,
Finisher Stapler, and Envelope Feeder to the printer. See the
installation instructions for the option you want to install.
Follow the instructions that correspond to the option you need to
install.
Memory Module
By installing a memory module in both open slots, you can
increase printer memory up to 256 MB. You may want to add
memory if you are having difficulty printing complex, graphics-
intensive pages, using the Multibin Unit with the Duplex Unit, or
if you regularly use numerous downloaded fonts.
You can purchase memory modules from various vendors. Be
sure the memory module you purchase meets the following
requirements.
DRAM type Synchronous Dynamic RAM Double In-line
Memory Module (SD RAM DIMM)
Memory size 16 MB, 32 MB, 64 MB, or 128 MB
Type 168-pin type, 64 bit, with SPD
Access speed 66.66 MHz or higher (15 ns or less)
Height Less than 40 mm