Epson EPL-9000, Руководство по обслуживанию

Страница: 106 / 162

Service Manual
Disassembly and Assembly
3.2.4.10 Sensor Removal
1. Remove the top cover. (Refer to Section 3.2.1.2.)
2. Remove the left cover. (Refer to Section
3 Remove the
(Refer to Section 3.2.4.4.)
4. Remove the trans. chute assembly. (Refer to Section 3.2.4.7.)
5. Remove the link assembly. (Refer to Section
6.
5 screws x 8) securing the front frame assembly to the front cover.
7. Remove screw x 8) securing the sensor, and remove it.
8. Discomect connector from the sensor.
Figure 3-33. Removing
the Sensor
3.2.4.11 Bottom Plate Removal
1.
2.
3
4.
5.
6.
7.
8.
Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the left cover. (Refer to Section 3.2.1.3.)
Remove the BTR assembly. (Refer to Section 3.2.4.4.)
Remove the trans. chute assembly. (Refer to Section 3.2.4.7.)
Remove the link assembly. (Refer to Section 3.2.4.1.)
Remove 5
screws x 8) securing the front frame assembly to the front cover.
Remove 2 springs from the bottom plate.
Remove
screw x 6) securing the support bracket, and remove the bottom plate after
removing the support bracket.
Figure 3-34. Removing the
Bottom Plate
Rev.
3-21