Epson EPL-5900L Скачать руководство пользователя страница 69

Страница: 69 / 192

Sharing Your Printer

❏

The printer server and clients should be set on the same network
system, and they should be under the same network management
beforehand.

❏

The on-screen displays on the following pages may differ depending
on the version of Windows OS.

Setting up your printer as a shared printer

When the printer server’s OS is Windows Me/98/95, follow these
steps to set the printer server:

1. Click

Start

, point to

Settings

, and click

Control Panel

2. Double-click the

Network

icon.

3. Click

File and Print Sharing

on the Configuration menu.

4. Check the “

I want to be able to allow others to print to my

printer(s).

” check box, then click

5. Click

to accept the settings.

Note:

❏

When “Insert the Disk” appears, insert the Windows Me/98/95
CD-ROM in the computer. Click

and then follow the

on-screen instructions.

❏

When the prompt to restart the computer appears, restart the
computer and continue the setting. See “For users restarting
the computer” on page 61.

For users restarting the computer

1. Double-click the

Printers

icon on the control panel.

2. Right-click the

EPSON EPL-5900L Advanced

icon, and click

Sharing

in the menu that appears.

Содержание EPL-5900L

































































































































































































Результаты поиска

Содержание EPL-5900L

Отзывы:

Бренды по названию

Популярные бренды

Epson EPL-5900L, Справочное руководство

Результаты поиска

Содержание EPL-5900L

Отзывы:

Бренды по названию

Популярные бренды